Debra, I best method I have found is to drive them out with a wooden dowel the same diamater(or just little smaller). A block with a hole a little larger than the key lead is placed under the key lead. The dowells deteriorate with use. Jut give them a quick touch on the sanding disk to restore them. David Jenkin ----- Original Message ----- From: Debra Feiger To: pianotech at ptg.org Sent: Sunday, July 30, 2006 7:13 AM Subject: removing key leads Can someone tell me the tool(s) they use to remove key leads? Thank you -- Debra -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060730/e2ad4431/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC