I've seen 'em in jacks, to center in the windows, but not in wippen flanges... --Cy-- ----- Original Message ----- From: "Chuck Beck" <mrchuckbeck at mail.com> To: <pianotech at ptg.org> Sent: Monday, July 31, 2006 9:25 AM Subject: curiously repinning >I recently began extensive action work on an 1894 WW Kimball grand for >myself. I found all of the wippens sluggish so I began repinning the >flanges. I found that almost all of the pins, while also corroded, were >all bent on one or both sides of the birdseye. Some of these bends were up >to 30 degrees. Repinning went fine, but I was just curious if anyone else >has often encountered bent center pins this extensively in their keyboards. >Cheers! > > Chuck Beck Piano Services > 1605 West Main St., Decatur, Il 62522 > (217)620-0842 > (309)451-4652 > mrchuckbeck at mail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC