Phil, Here's what I use for the teardown and recording process. Note that there 2 pages so you might want to copy on both sides. Hope this helps. Tom Servinsky ----- Original Message ----- From: "Phil Bondi" <phil at philbondi.com> To: "Newtonville" <pianotech at ptg.org> Sent: Thursday, June 08, 2006 5:34 AM Subject: Rebuilding breakdown and to-do list needed. > Hello all. > > A recent computer glitch, and my 'Teardown' procedure along with my > Re-build Procedure list is gone. > > That'll teach me not to have a hard copy available... > > The 'Teardown' procedure is something I made available to the list a few > years ago...the Rebuild sheet is something I give to the prospective > client as to what I will do for a particular procedure...replace hammers, > new damper felt - clean the heads and wire, re-felt the action frame, > regulate, etc. > > If anyone has either one of these, I would greatly appreciate if you would > send it to me. Please email me off list at: > > phil at philbondi.com > > To anyone who helps: - a round of drinks are on me at Rochester. > > Thanks, > > -Phil Bondi(Fl) > > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: Rebuilding Teardown sheet front page.pub Type: application/octet-stream Size: 59904 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060608/59516de3/attachment-0001.obj
This PTG archive page provided courtesy of Moy Piano Service, LLC