On 6/17/06, gordon stelter quoth: >Great idea! Thanks! > Thump > >--- Dean May <deanmay at pianorebuilders.com> wrote: > >> Assemble the flange to the butt with your new pin >> (after its sized to the >> bushing)then put a couple of drops of CA on the end >> grain of the butt so > > that the CA wicks up to the pin. It works> Unfortunately, I didnt see Deans note in time to try it, I will next time. What I did was, per Joe, I think, put a drop of hot water on the birdseye, let dry, then followed with a drop of thin CA. Worked like a charm, I took out 22 1/2 pins, was able to repin with 21 1/2 with almost no reaming, whoever jammed those things in in the first place must have worked hard cause they were all a wee bit bent in the middle, talk about a lot of effort for no result, it about wore out my hand taking the old ones out. Thanks all! -- ----Dave ----------------------------- Dave Doremus, RPT New Orleans ------------------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC