No dice, Amy, you can't use this dimensionless ratio in the Doppler equation. You have to have a frequency. It DOESN'T matter what pitch (frequency) you measure. The problem comes when you try to use a logarithmic scale (cents) in a linear equation (Hz in Doppler). JD _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Amy Zilk Sent: Wednesday, June 21, 2006 5:46 PM To: Pianotech List Subject: Re: Doppler puzzle Try dividing any two frequencies that differ by 10 cents. It's a constant. Ten cents difference anywhere in the spectrum is a constant frequency ratio of ~1.0579. The doppler shift is found in terms of this ratio and you can convert the 10 cents difference into the ratio of frequencies. It's counterintuitive for me (but not for Mark), that it doesn't matter which pitch you are measuring but that's the way it works. az <file:///C:%5CDocuments%20and%20Settings%5Cazilk%5CMy%20Documents%5CPiano%20 Tech%5CAZP-email-sig.gif> -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060622/d83fa324/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC