bore brushes

[JIMRPT at aol.com]

In a message dated 6/24/06 4:02:15 PM, pianoman at accessus.net writes:


> Has
> anyone used the 7mm ( around 0.285) bore brush before and does it do a good
> job of cleaning the original holes to help avoid pin jumping with the new
> pins?
> 
James G;
bore brushes do a good job of 'cleaning up' the old holes...I use this method 
on blocks to be reused.
I always repin with a driving fluid...varnish being my choice 
de-tere..........
Jim B (FL)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060624/3a4a259f/attachment.html