NEWOCTAVE GLOBAL Tuning hammers....

[pianotune05]

Hi Joe,
I've seen one of your hammers and they are made really well.  
Marshall
  ----- Original Message ----- 
  From: Joe And Penny Goss 
  To: Pianotech List 
  Sent: Tuesday, June 27, 2006 8:59 AM
  Subject: Re: NEWOCTAVE GLOBAL Tuning hammers....


  Sara
  If the flex and cost bothers you, check out my hammers.
  Joe Goss RPT
  Mother Goose Tools
  imatunr at srvinet.com
  www.mothergoosetools.com
    ----- Original Message ----- 
    From: deanslist 
    To: Pianotech List 
    Sent: Tuesday, June 27, 2006 6:37 AM
    Subject: Re: NEWOCTAVE GLOBAL Tuning hammers....


    I'll second the recommendation for Steve Fujan's levers. I'm just learning how to tune
     and the stiffnes of these levers is making it much easier to control the movement of the
    pin. I use (so far) two different tubes. The six inch tube is nice on the junker with pins that 
    aren't incredibly tight. The nine inch tube is great on the tight tuning pins on the Pearl River.
    I also have one of those New Octave Global hammers - I consider it and the Randy Potter
    apprentice lever to be emergency equipment. The flex in the steel really bothers me.

    Sara Nash
    student
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060627/4952aec5/attachment.html