Hi Ron, I have a friend who bought a used piano at a thrift store. For whatever reason he won't put the casters on. He as books under it. It seems stable, but could this be why it won't hold a good tune? Even if it's seems like it's not moving, could the piano still be supported poorly? Marshall ----- Original Message ----- From: "Ron Lindquist" <rrlindquist at g2a.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Friday, June 30, 2006 12:44 AM Subject: Re: new hamilton console >I see this all the time in old houses and even some new ones. Even if you >move it to the other side of the room , the floor many times slopes from >all sides to the middle. I carry a few shim shingles for this purpose >because I don't like to tune unless supported the way it was built. Then >tell the client they may want to use something esthetically more pleasing >and if it is not supported correctly it will go out of tune faster. > > Ron > > At 05:49 PM 6/29/2006, you wrote: > >>List, >>I have a new Hamilton vertical where the left leg is touching the floor >>and the right is not. This is causing the piano to wobble at that leg >>because more weight is on it. My question is: Are the casters meant to >>touch the floor on the front legs? It seems to me that I have seen many >>that don't. >>Thanks, >>Rick Ucci/Ucci Piano >> >> >>Internal Virus Database is out-of-date. >>Checked by AVG Anti-Virus. >>Version: 7.1.394 / Virus Database: 268.9.2/372 - Release Date: 6/21/2006 > > > -- > Internal Virus Database is out-of-date. > Checked by AVG Anti-Virus. > Version: 7.1.394 / Virus Database: 268.9.2/372 - Release Date: 6/21/2006 > >
This PTG archive page provided courtesy of Moy Piano Service, LLC