List, What I tried to convey in the post below is the octave of keys come as one piece, i.e.connected and as a unit is glued to the key plank. Tha key plank/slab is then cut apart including the keytops...hopefully that makes more sense? I also hope I have that correct... David I. This is a forwarded message From: "David Ilvedson" To: caut at ptg.org, pianotech at ptg.org Received: 3/6/2006 1:12:14 PM Subject: [CAUT] Kluge keytops List, A follow up on my Kluge keytops from Pianotek post...Mark at Pianotek informed that the Kluge are meant for new keys and thus overwide and keys with keytops are then cut with bandsaw. He recommended,as many had, the German keytops/fronts, #KTF-5C, which are pre-separated...he also is graciously sending me an octave to replace the G, I broke...thanks Mark. David Ilvedson, RPT Pacifica, California -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060306/51e92e4d/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC