At 10:22 AM 3/10/2006, you wrote: >Thanks, Roger. I thought of that after it slipped out. I could have >saved myself a whole lot of trouble if my brain had been traveling in the >right direction from the start. :>) >jeannie Hi Jeannie, Another thought, The last one that I did, I used double sided carpet tape. It worked fine and was less messy. Lay the bar on the sticky side of the tape. Press firmly. Trim with a sharp razor knife. Peel backing, then stick to plate in one shot. =-O Beats burning off the shellac. Regards Roger -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060310/400e2722/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC