Bill, Read the articles written by Del Fandrich in the August and September, 2002 issues of PTJ where he discusses soundboard prep and application of epoxy coating. Tom Cole william ballard wrote: > The answer is probably obvious, but I thought I'd ask it any. When > doing the epoxy treatment for an older board, does this necessarily > mean stripping, preparing and finishing both sides of the board. > (Speaking as one for whom varnishing a board was always a cosmetic > step, and thus only necessary on the top side........) > > Bill Ballard RPT > NH Chapter, P.T.G. > wbps at vermontel.net > > "There are fifty ways to screw up on this job. If you can think of > twenty of them, you're a genius......and you aint no genius" > ...........Mickey Rourke to William Hurt, in "Body Heat", > discussing arson. > +++++++++++++++++++++ > >
This PTG archive page provided courtesy of Moy Piano Service, LLC