Epoxy Finish for the Board.

[Ron Nossaman]

> The answer is probably obvious, but I thought I'd ask it any. When  
> doing the epoxy treatment for an older board, does this necessarily  
> mean stripping, preparing and finishing both sides of the board.  
> (Speaking as one for whom varnishing a board was always a cosmetic  
> step, and thus only necessary on the top side........)
> 
> Bill Ballard RPT


Top side only. It won't have much effect on the bottom. What 
you're doing is limiting compressibility at extreme fiber 
where the load is.

Ron N