I like that Idea. Maybe even some nice veneer or what about a thin beveled mirror cut to size? Too cheesy? Yeah, I gave up on the vinyl idea. That sucked pretty bad once I had a look at it. Thanks for your help; you're the ONLY one who responded so I appreciate it all the more! Terry Peterson ----Original Message Follows---- From: John Ross <jrpiano at win.eastlink.ca> Reply-To: Pianotech List <pianotech at ptg.org> To: Pianotech List <pianotech at ptg.org> Subject: Re: acrosonic "rattan" music desk Date: Sun, 26 Mar 2006 18:20:44 -0400 What about a piece of that 1/8", or less plywood cut to size. I just don't like the idea, of vinyl. Or if you could find a dead naugah (sp), somewhere. :-) (Think Wurlitzer, I think that was the brand. Their usage, actually led to the extinction, of the naugah) John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ----- Original Message ----- From: "pianolover 88" <pianolover88 at hotmail.com> To: <PIANOTECH at ptg.org> Sent: Sunday, March 26, 2006 3:53 PM Subject: acrosonic "rattan" music desk >Yep, pretty hidieous! Got an old acrosonic I'm working on; mostly cosmetic >stuff. What would you recommend as a replacement for the rattan/wicker >insert in the music desk? I really don't want to put wicker in there again, >so I was thinking of maybe a walnut colored piece of vinyl, or perhaps a >piece of veneer or whatever. I'm looking for some good alternatives if you >could help please. This is the type of M. desk that screws onto the front >of the top lid, and has a special bevel, so the standard "hinge" type desk >won't fit, so I have to use this one, instead of just replacing it with the >hinge type. Thanks! > >Terry Peterson > > I
This PTG archive page provided courtesy of Moy Piano Service, LLC