Phil, If you just always wear swim trunks and flip-flops, your customers will expect and come to love their crazy piano tuner...;-] If you have concert work, hopefully, you know in advance. In that case do you want to be rested, tuning wise, from a day in the shop, or be nicely dressed from a day of tuning, but a little tired...no easy answer here. I still think 1/2 day of shop and 1/2 of tuning works best... David Ilvedson, RPT Pacifica, California ----- Original message ---------------------------------------- From: "Phil Bondi" <phil at philbondi.com> To: "Pianotech List" <pianotech at ptg.org> Received: 3/31/2006 2:45:55 AM Subject: Re: Time Management: - in review.. >I thank all of you who have chimed in on this delicate subject, both >publicly and privately. >I tend to agree with the majority that dedicated days for both shop and >field is most likely the way to go. The next challenge for me is to get >to the point where a 'day in the shop' will be just that - a day in the >shop and not worry about the potential lost income from not doing >tunings in the field. I'll have dedicated days to do that. The one thing >I did not mention was my Concert work, and the reason I didn't mention >it is because: let's say I dedicate Monday as a shop day, but I have 2 >tunings at 3 & 6 PM. I have shown up for my concert gig literally in >swim trunks, a t-shirt and flip-flops - they don't care how I look as >long as the piano is cool with the artist. I could never show up to a >regular client's home in anything less than my usual Business Casual >look (no, I don't wear a tie, but have considered it..and still may do it). >As far as the comments about refinishing becoming more of a burden and a >time-consuming endeavor: I guess I'll have to cross that bridge at that >time. I do view refinishing as a similar process as learning how to tune >and repair: you do not have a full book right away when you start. I >don't expect to have a full book when I start and I am not expecting >technicians to ship their pianos to me because I will probably not be >cost-effective to them. My refinishing endeavor goal is to offer this as >part of the rebuilding package, not as a singular item. Under those >conditions, I don't see refinishing taking over my shop time. I hear >those that see refinishing as a time-consumer, and thanks. >Water-based vs. Nitro - a no-brainer for me - learn the benefits and >drawbacks of both. I have not worked with water yet...and don't forget >Poly folks..... >JR White: If the shop goes up in flames, so does the house. I think that >might make me a tad mad....! I hear you though. >tools - I need more tools!!!, >-Phil Bondi(Fl)
This PTG archive page provided courtesy of Moy Piano Service, LLC