This piano is the "everthing connected to the bracket" type. No problem with runaway stickers or benefit in removing the keys. Action is held in place at the top by four square headed fat bolts threaded in the head to recieve bracket fastening screws. Clearance here is somewhat a problem, but the damper rod sticks out the back so far that there is no possibility of clearance except perhaps at the bassmost end of the piano. I hope I'm making some sense here. Anyway, I'm also hopeing to get a little advice on what to do. I'm thinking I may need to remove the holding bolts from the plate, move the action all the way to the left and lift out. Any suggestions? Thanks. Phil Frankenberg Chico Ca. By the way the piano is a 1937 Acrosonic. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060509/cb41dbf5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC