Before you remove the sticker guide rail from the brackets, do this: remove the wire handles from two mutes and stick the mutes on the end sticker wires. This will prevent the rail from disengaging all stickers. But if that happens, fear not. Stand the action on a table or floor and angle the rail back on, one sticker at a time. You get faster the more times you do it. When replacing the action, rest the stickers on the capstans and install a few screws loosely then locate the action onto its mounts. Piece-o-cake. -- Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC