_____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Erwinspiano at aol.com Sent: May 15, 2006 9:30 PM To: pianotech at ptg.org Subject: Re: tuning pin bushings too big Dittos. Good suggestion. I do this to many plates. Especially Steinway to prevent the pins from possibly leaning into the plate hole itself. Dale A good case can be made that this was intentional. I wrote a blurb on this for the Journal several years back. Complete with the geometry. Del -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060516/b9ac777d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC