Stupid newbee!!! Stupid! Stupid!I don't know, why I said epoxy, as any time I have used plugs, I used glue. :-( John M. Ross Windsor, Nova Scotia, Canada. jrpiano at win.eastlink.ca ----- Original Message ----- From: Farrell To: Pianotech List Sent: Sunday, May 21, 2006 8:48 AM Subject: Re: Stupid newbee!!! Stupid! Stupid! Someone mentioned setting the plug in with epoxy, so it bears pointing out that the tight fit suggested below would be for a glue joint. If you are using epoxy (like West System - I usually use it unthickened), you want to make the hole slightly larger than the plug. Terry Farrell ----- Original Message ----- >Drill out 31/32" hole to insert a Ready Made Plug from Pin Block Material I'd make that a 31/64" hole for the 32/64 (1/2") plug, metric would be so much easier. Regards,Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060521/85218be5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC