OT Key buttons

[Michael Spalding]

Rough cut prior to installing:  bandsaw
Trim (nearly) flush with keystick:  bandsaw
Final smoothing:  block plane


> [Original Message]
> From: firmin1 <firmin1 at bellsouth.net>
> To: Pianotech List <pianotech at ptg.org>
> Date: 10/13/2006 5:17:16 PM
> Subject: OT  Key buttons
>
> Hi all,
> What is your preferred method of cutting Key buttons?
>
> thanks,
> Berley A. Firmin II