OT Key buttons

[William R. Monroe]

Or, in the field, you could:

Rough-Cut/Trim: fine-tooth backsaw
Trim/Final Smoothing: Sharp Chisel

William R. Monroe


>From: "Michael Spalding" <spalding48 at earthlink.net>

> Rough cut prior to installing:  bandsaw
> Trim (nearly) flush with keystick:  bandsaw
> Final smoothing:  block plane
> 
> 

>> Hi all,
>> What is your preferred method of cutting Key buttons?
>>
>> thanks,
>> Berley A. Firmin II