"Paul Chick (Earthlink)" <tune4 at earthlink.net> wrote: I get better mileage out of the nitrile gloves, with a wrap of masking tape for the high wear spots. I like the nitrile gloves, too, but I use leather for the high wear spots. Cut a strip of fairly thin leather about 3/4" wide, then cut various lengths that will wrap around different fingers/thumb with enough overlap to allow for gluing. If you make these tight enough for each digit, they are reusable for several years, are very comfortable, and hold up extremely well against the onslaught of piano wire. Mark Potter -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070808/8ecbdbef/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC