Great suggestion, Bill! I've had the same problem (for years) with my Bushmaster. Thanks for the tip. JF On 8/21/07, William R. Monroe <pianotech at a440piano.net> wrote: > For those of you who use the Bushmaster/brass cauls for key bushing: > > One problem I've experienced with the Bushmaster tool is its willingness of > the lower barrel part to unscrew from the rest of the assembly. Short of > using a pipe wrench, one thing I found to work well for keeping the assy. > together is to put a wrap of Teflon tape around the threads (the same as is > used for compressed air fittings). Since I put the tape on, no unscrewing - > been at least a dozen bushing jobs now, and it used to come apart any number > of times during a single job. > > William R. Monroe > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC