Becket

Alan Barnard pianotuner at embarqmail.com
Sun Dec 9 09:57:31 MST 2007


Truly, one must always take great care when forming theories on limited data.

Or, as Mark Twain observed: "Indians always walk single file. I know this because I saw one do it once."

Alan Barnard
Salem, MO




Original message
From: "Michael Kurta" 
To: "Pianotech List" 
Received: 12/9/2007 7:29:38 AM
Subject: Re: Becket


    More info on the broken becket I experienced last week.  Mine broke at the mid-point of the 90 degree bend.  When I cut the remaining bend off to get back into straight wire, the wire "crunched" when cut rather than the usual resistance as if it had crystallized.  Another 1/4" down the wire it was normal.  Making a new becket bend and reinstalling the wire worked fine.  
    I agree with you Jurgen, in 20 years and 4,000 pianos I have never encountered this.
    Mike Kurta  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071209/6be974c0/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC