On Dec 10, 2007 6:33 PM, Farrell <mfarrel2 at tampabay.rr.com> wrote: > Likely best to try and keep it in the same line to minimize damper > problems. Also, I should think a nail of similar diameter cut to length > would work fine also. > > Terry Farrell > The one time I had to do this I used a nail. And it did work just fine, even though it was slightly larger than the original pin. I was able to drill out the old pin, and put the nail in its place. I didn't bother with trying to get paint on it. -- JF -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071210/f2ce7fea/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC