Paul Mulik wrote: > Hello list, > > One month ago my church bought a new Baldwin SD10. I installed a DC the > day after it was delivered (2 tanks, 3 rods), tuned it a few days later, > and tuned it again a couple of weeks after that. > > I'm having trouble with a few of the unisons in the fifth octave, there > are 3 or 4 strings that just will not stay in tune. I keep > retuning them and they sound fine for a while, but then a few days > later they'll be 20 cents flat. The tuning pins do not feel loose, and > I've tuned other large grands with no difficulties, so I don't think the > problem lies in my tuning technique (though I could be wrong -- wouldn't > be the first time!) I have not tried driving the pins further into the > pinblock; it seems to me this shouldn't be necessary on a new piano, but > again, I could be wrong. > > Any suggestions? > > Paul Mulik > Joplin, MO Have you checked to see that the beckets aren't pulling out? -- Conrad Hoffsommer - Keyboard Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 1-(563)-387-1204 // Fax 1-(563)-387-1076
This PTG archive page provided courtesy of Moy Piano Service, LLC