stuck bolts

[Paul McCloud]

Well, I'm not Mike (I'm guessing this was supposed to be private), but I'd use some Liquid Wench.  Wait a while and let it soak in.  Use a Dremel with a cutoff wheel to dress up the slot (or cut a new one).  Or just replace the bumper...
Paul McCloud
Sandyeggo


----- Original Message ----- 
From: David and Jean Weiss 
To: Pianotech List
Sent: 12/30/2007 8:32:35 AM 
Subject: stuck bolts


Hey Mike,

I'm trying to remove the two screws that hold the lisence plate on my car.  They are rusted and stuck fast.  

The slots for a screwdiver are stripped, I was able to grab the edge of the screws with vice grips but they will not turn.  I spayed with PB but they still wouldn'b budge.  What else can I do?

Thanks,

David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071230/921a2b9f/attachment.html