> Ray, > My preference would be to loosen the key bed and jack it down a bit to > get the screws to just pass. Then remove the jack and screw the keybed > screws back tight. Once the action is out, then you can get a closer > look at the bracket and see if it really is "growing", or.... did > some knot-head, at the factory grab the wrong bracket. (they do have two > sizes in the same years.) > Regards, > > Joe Garrett, R.P.T. And got the action with the wrong brackets in the piano at the factory by dropping the key bed? Would you like to call someone? Joe... Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC