Quick and dirty: squirt plenty of accelerator in hole, add several drops of CA glue letting it run down the sides, wait two minutes, insert screw. Or Clip off a couple of pieces of solder as long as the hole is deep, insert solder pieces, insert screw Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Brian Doepke Sent: Monday, July 02, 2007 2:39 PM To: 'Pianotech List' Subject: plate screw Anyone have any tried and true methods of repairing a stripped out plate screw hole? Thank you, Brian P. Doepke, RPT; M.M.Ed. AAA Piano Works, Inc. Piano Tuning-Repair-Purchase Consults 260-432-2043 260-417-1298 www.aaapianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070702/cc0636c1/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC