>Moving the knuckle (better to have bought the shank with the correct knuckle >to begin with) to 17 mm and taking 1 gram off the hammer you will achieve >approximately the same goal as moving the knuckle to 18 mm (maybe a little >better in fact). Actually, it's better to start with parts from the fabulous "Parts Kits". Select your parts for optimum performance before you buy the sets. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070703/427bb45d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC