Yes it is! David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Tuesday, July 03, 2007 8:31 PM To: pianotech at ptg.org Subject: Action Ratio and Dip and Blow and Etc. Moving the knuckle (better to have bought the shank with the correct knuckle to begin with) to 17 mm and taking 1 gram off the hammer you will achieve approximately the same goal as moving the knuckle to 18 mm (maybe a little better in fact). Actually, it's better to start with parts from the fabulous "Parts Kits". Select your parts for optimum performance before you buy the sets. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070703/76c2be3e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC