Someone had heard that they could refinish their piano with Tung oil. Instead of using 0000 steel wool, a few times, with a rubout and dry, between coats, which does give a quite nice finish. They did three coats, but used a brush, and didn't rub out between coats. The result is a thick non smooth finish. What is the best way out of this, to end up as it should have been? What can be used as a stripper? I was thinking strip, then use the 0000 steel wool, as should have been done initially. John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070712/bd52daa0/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC