Hello list, Would anyone care to share their technique for locating and notching rib ends into the inner rim? My first piano I used two sided tape on the rib ends and set the board in - the tape stuck to the inner rim and I used this to cut the notch. This was not as accurate as I would have liked. Some of the other problems were the shape of the rib end - being tapered presented some difficulty with this notching - trying to match the taper was not easy. On the second piano the rib ends are flat. Also the depth of the notch - should the depth of notch exactly match rib end hight? Be slightly deeper? How thick or thin should the rib end be? Thinner is better in my mind. Is there a limit on how thin? Thanks for any insights. Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071102/7222ac9c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC