At 04:28 -0600 17/11/07, William R. Monroe wrote: >John, > >While I agree that the parts are not exactly the same, my question >to you is where is that 2mm difference? From my perspective it >looks like the drop screws are about .5mm off, and it looks like it >is quite possible that the rest of the difference is at the leading >edge of the flange molding - which would be inconsequential. I'd be >curious to know what the measures are from the center pin to the >leading edge of the molded interior of the flange on both parts. >Also from the core to the center pin on both parts. A picture is worth a thousand words. JD -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071117/1e492bb8/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: shanks_compared.jpg Type: image/jpeg Size: 62534 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071117/1e492bb8/attachment-0001.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC