John, Awesome graphics! How do you do that? Greg P.S. along with other disparities I see the core to hammer flange center is slightly different too! From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of John Delacour Sent: Saturday, November 17, 2007 7:02 AM To: Pianotech List Subject: Re: Steinway action noise At 04:28 -0600 17/11/07, William R. Monroe wrote: John, While I agree that the parts are not exactly the same, my question to you is where is that 2mm difference? >From my perspective it looks like the drop screws are about .5mm off, and it looks like it is quite possible that the rest of the difference is at the leading edge of the flange molding - which would be inconsequential. I'd be curious to know what the measures are from the center pin to the leading edge of the molded interior of the flange on both parts. Also from the core to the center pin on both parts. A picture is worth a thousand words. JD -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071118/b760d9ac/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/octet-stream Size: 62534 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20071118/b760d9ac/attachment-0001.obj
This PTG archive page provided courtesy of Moy Piano Service, LLC