Hi Dave, All of the Heintzman's I have encountered, the stretcher is both glued and doweled to the rim/casework. A solution to the problem would be to block sand a small amount of material off the bottom of the stretcher. If carefully done you should be able to get the clearance with out damaging the finish. A Palm sander would be the way to go in the shop, but the client may not like the dust in the home. Regards Roger -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071125/60b15299/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC