Pullin' & Replacin'

[Jon Page]

>What's the down and dirty way to pull old grand backchecks off the 
>wires (reusing the wires) and putting the new heads on?

Split the old backchecks off with side cutters or diagonal cutters,
the same as old hammer heads.  Or spin them off with your
backcheck installation tool chucked in a drill.

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071029/9ff1a8af/attachment.html