Matthew, It wouldn't be unusual for the drop wires to be bent and/or binding where they hook on the keys, acting like a spring preventing the return of the key. Try disconnecting one from its key, and see if the wippen-butt-hammer assembly returns freely without the constraint of the key-dropwire joint. Mike Matthew Todd wrote: > I returned from the spinet evaluation. The elbows will need to be > replaced. And with the keys that do work, when you release your > finger from the key, the hammer only goes about half way back and you > have to move it with your hand to return it. I am suspecting the > hammer return springs need replacing. It didn't "feel" like tight > flanges, and the hammer springs are where they're suppose to be, but I > guess they just are wore out. > > > Thoughts? > Matthew
This PTG archive page provided courtesy of Moy Piano Service, LLC