Decapping the bridge

[Jon Page]

>To answer my own question about plugging holes, one more supplier for fill
>dowels is Pianotek.

Kill two boids wit one stone.

After the bridge pins are removed, fill the holes with epoxy. This 
will seep into
fishers in the root and fill the holes, top off as it soaks in. 
Route off the cap
and any small amount of void can be filled with the epoxy which is used to
adhere the cap.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080804/73677ccf/attachment.html