What size bit would you recommend for this block for a 2 pin if someone like a very easily rendered pin? Dale Right off, I don't remember. I'm not one to make many notes, nor do I string enough pianos to remember. Ask Ron Nossaman - he strings 10 pianos for every one I do and uses the same type block. Regardless of what anyone else experiences, I always drill a set of test holes in locations where tuning pins will not be, pound in test pins and give 'em a try. That way there is no guessing. I use the two-step drill method like Ron N. Or with a pneumatic press? Aye? Dale A pheumatic press for capping a pinblock? Oh geez, that so stupid Dale. How could you even conceive of such a ridiculous idea. That's the most outrageous idea I've ever heard of. How could it be done? Who would even try to do such a dumb thing? Geesh........ Terry Farrell PS: For Sale - one HEAVY DUTY pneumatic pinblock/laminated-rib press - cheap! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080810/c34a3c06/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 55980 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080810/c34a3c06/attachment-0003.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 60115 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080810/c34a3c06/attachment-0004.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 78692 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080810/c34a3c06/attachment-0005.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC