> ...I knocked out a few bushings... To avoid damaging a bushing, use a chase pin. This is usually a #19 or smaller but actually any pin that slides through the birdseye easily will do. This will align the holes and insure that no damage occurs. SIze the bushings and insert the chase pin, push the new pin in until it stops at the birdseye, the chase pin will be pushed out partly. Finish installation with a pinning tool. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080814/3bc90400/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC