Matthew, Think about it. How are you going to get a cut pin without a point into the bushing ? Best wishes, Tom Driscoll ----- Original Message ----- From: Matthew Todd To: Pianotech List Sent: Thursday, August 21, 2008 2:05 PM Subject: RE: Center Pin When you've had to go a pin size up or down on a clients action, are you allowed to save them, or does the length of the pin vary to much from action to action that you just discard them? Matthew Scott Jackson <scottwaynejackson at hotmail.com> wrote: I'm not saying that you should deliberately waste pins, just that the little buggers are easy to drop! I congratulate anyone who can re-use a single pin 88 times and save it for another day, BUT when there are 1000 pins in a $20 bag, I'm putting it at the bottom of my list of things to worry about. Sorry, it's not important. I shouldn't have said anything. Scott Jackson ---------------------------------------------------------------------------- Just how, and why, do you waste pins? I can't imagine how one wastes pins. -- Regards, Jon Page ---------------------------------------------------------------------------- in your area now! View photos of singles No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.6.6/1625 - Release Date: 8/21/2008 6:04 AM -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080821/8ccb8e18/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC