Phil, I used to serve a client like this. Not much of anything you do will likely help the situation. If the pins seem normally tight why would getting them tighter help anything? Youre not likely to do anything to prevent string breakage either which is undoubtedly part of the tuning stability issue. Either best of luck . Or run away! Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of PJR Sent: Wednesday, August 27, 2008 4:52 PM To: Pianotech List Subject: String breaker Too Reading Wim's solution brought to mind a similar problem: I service a small(4'11") Weber(Korean) grand in a piano bar. It is only three years old. They have about five piano players that take turns beating the tar out of that piano every night. I tune it every two weeks and it is horrendously out of tune with at least two broken treble strings each time. The tuning pins seem normally tight ( I don't have a torque wrench) and I pound the tuning in good, but it is noticeably out of tune in a matter of days. I know that this is not the quality of piano for this venue, but my question is, would CA gluing the pins be a solution to keep this piano in tune, being only three years old? I've never doped a piano this young. Is there any other solution that might stop this slippage? Would Wim's (et al.) solution of a monitor speaker be a viable solution? Phil Ryan Miami Beach Willem Blees wrote: Jim Tell the church to put a monitor speaker behind the pianist. He/she is trying to play as loud as the drummer sitting next to him/her. But since he/she can't hear the piano over all the racket, he/she plays louder. A monitor speaker right behind him/her will help. But the piano player has to do his/her part, too. Willem (Wim) Blees, RPT Piano Tuner/Technician Honolulu, HI 808-349-2943 www.bleespiano.com Author of The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: James Johnson <mailto:jhjpiano at sbcglobal.net> <jhjpiano at sbcglobal.net> To: pianotech at ptg.org Sent: Wed, 27 Aug 2008 4:00 am Subject: String breaker I have a Kawai model 500 in a church which constantly has broken bass strings. All the breakage occurs from B2 up to the break. I am getting tired of ordering replacement strings and actually order them in multiple sets now so I have several replacements on hand. I have deregulated the action to reduce power (no, the pianist hasn't noticed) and that helped a bit, but broken strings are still an almost weekly occurance. Any suggestions? Would rescaling that part of the piano help? Thanks, Jim Johnson _____ Check out AOL Video <http://video.aol.com/show/ap/101923?ncid=aolvdp00050000000184> to see what's making news today! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080827/55c40145/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC