spring loops

tom tomtuner at verizon.net
Sun Aug 31 10:29:42 MDT 2008


Rick,

This is puzzling. If the action is placed back in the piano in the same
position as when it was removed the jack top to butt relationship should be
unchanged. The main action rail and action mounting studs are untouched in
the process.

I think you may have installed the hammer-butt assembly onto the flange and
not matched the slot in butt with the center pin.  Essentially this will
lower each hammer assembly pushing the shank off the rail and causing the
hammer to block. Pull out one butt and flange, observe the slot and assemble
correctly out of the piano. When I tighten the butt plate I move the butt
until the center pin “snaps“ into the slot then tighten the plate. If I am
correct when you put the assembly back in , there will be excessive lost
motion and letoff on that note.

I can’t think of any other reason for such a drastic change in the
key-action relationship.

 

This may be a good example of when to step back and figure out what has
happened before readjusting everything.

I’ll be interested in what you find,

Best wishes,

Tom D.

 

   _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of richard.ucci at att.net
Sent: Sunday, August 31, 2008 11:08 AM
To: pianotech
Subject: spring loops

 

List,

Just completed  Yamaha spring loop replacement. Followed Tom D's method.
Went well , and after filing hammers, cleaning slots , cutting cord, and
glueing new cords, it took about 6hrs.

 

When I installed the action back in the piano(p-22) , all of the hammers
were way up off the rail and blocking when played. The solution I took was
to lower capstans and lower let-off button and reset backcheck distance.

 

My question is: What caused the capstans to change their relationship to the
whippens so drasticaly ?

 

Thanks,

Rick Ucci/Ucci Piano


No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.6.14/1643 - Release Date: 8/30/2008
5:18 PM



No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.6.14/1643 - Release Date: 8/30/2008
5:18 PM
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080831/7bb86f7b/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC