[pianotech] Twin Dollies

Bill Costanzo pnotuner at rochester.rr.com
Thu Dec 4 15:08:28 PST 2008


Thank you Al and Patrick; I do have a tilting dolly but I didn't think it
had enough clearance to right the piano once the twin dollies were attached.
I can see how a couple of 2x4's would help though.  I'll give it a try.

I'm curious about how you'd use the hand truck to lift a side at a time. 

 

Bill Costanzo

  _____  

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of pcpoulson at sbcglobal.net
Sent: Thursday, December 04, 2008 2:29 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Twin Dollies

 

Bill: This is where you need a tilting dolly, available from our supply
houses. No technician should be without one. You may not need it very often,
but when you do, its a life (and back) saver.

Patrick C. Poulson
Registered Piano Technician
Piano Technicians Guild

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081204/ffa81b24/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC