At 10:29 -0800 26/12/08, Gene Nelson wrote: >Must take care then if also trying to reposition the tray to conform >toÊthe magic line from balance rail pin through lever/capstan >interface and lever center. On the fewÊSteinways I have done this >way itÊwill usuallyÊreposition the tray lower in the cavity. I don't follow. Doing it the way I suggest or some way similar, eg. routing the front of the tray and adding a strip below to allow for the screw length, everything rests and moves in exactly the same place as before give or take the micro-adjustment you installed the screws for. JD
This PTG archive page provided courtesy of Moy Piano Service, LLC