I just can't say enough about how great I think this simple shop tool is: the arbor press. I have hammered in far too many balance and front rail pins and enlarged holes, etc. A simple arbor press does such a good job - rail pins, capstans, backchecks, etc. I've only used mine two or three times now on projects, but I just think it is the greatest! No flattening of the pin tops, etc. FWIW: Terry Farrell Terry Farrell Farrell Piano www.farrellpiano.com terry at farrellpiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080204/d2c8b56c/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 59386 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080204/d2c8b56c/attachment-0002.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 37350 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080204/d2c8b56c/attachment-0003.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC