We have long used metric exclusively for regulating in our shop. However, the thousandth of an inch is still very handy for really small measurements and distinctions, so we refuse to part with it! Alan Eder -----Original Message----- From: piannaman at aol.com To: pianotech at ptg.org Sent: Tue, 5 Feb 2008 6:27 am Subject: Re: Regulating With Metrics Regulating with metrics has always seemed like such a natural way to do it. Maybe it's because I work on more Asian and European pianos than American built instruments, and all of the instruction and other printed material I've seen was metric in nature. Dividing and multiplying into 1s, 10s and 100s is far simpler for me than doing the same operations by 64ths, 32nds, 16ths, etc., etc. Dave Stahl Dave Stahl Piano Service dstahlpiano.net -----Original Message----- From: Dean May <deanmay at pianorebuilders.com> To: 'Pianotech List' <pianotech at ptg.org> Sent: Tue, 5 Feb 2008 6:07 am Subject: RE: Regulating With Metrics A hearty amen. When going through engineering school we primarily used metrics and even when I worked in design in industry. It sure did make the calculations easier. ________________________________________________________________________ More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080205/e57f6891/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC