I! ROFL! br ----- Original Message ----- From: "Scott Jackson" <scottwaynejackson at hotmail.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Tuesday, February 05, 2008 6:40 PM Subject: Re: Regulating With Metrics > All in favour of Del's proposal say I. > Right then, from now on all piano measurements shall be given in pencil > leads (pleads for short). So let's see, we have: > set-off = 4 pleads > key dip=12 pleads > hammer throw=57 pleads > > swj > > > exception of things like wire diameters and centerpin diameters) there is > very little in the piano that needs to be more accurate than the width of > a > pencil lead. >
This PTG archive page provided courtesy of Moy Piano Service, LLC