Scott and list, Yes, I did post this some time ago but I couldn't open any attachment to verify. I suppose I could post a picture again but I think the others that were posted a short time ago will suffice. I you need it again just ask. Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Scott Jackson Sent: Tuesday, February 12, 2008 12:46 AM To: Pianotech List Subject: Re: hitch pin loop tool hitch pin loop toolThere was a message from Greg Newell way back in 2003. It can be found at: https://www.moypiano.com/ptg/pianotech.php/attachments/26/77/a6/75/attachment.ht m And i believe the attached file is a picture of it, but don't ask me where i found it, cause i can't find it now! Scott Jackson ----- Original Message ----- From: David Ilvedson To: caut at ptg.org ; pianotech at ptg.org Sent: Tuesday, February 12, 2008 9:34 AM Subject: hitch pin loop tool I have always duplicated hitchpin loops on single strings with my round needle nose and a vice-grip. It seems to me there was a simple tool using a dowel and a screw? I'm talking about field work here. David Ilvedson, RPT Pacifica, CA 94044
This PTG archive page provided courtesy of Moy Piano Service, LLC