Young Chang crunchy damper sounds

Joe And Penny Goss imatunr at srvinet.com
Tue Feb 12 16:27:55 MST 2008


Hi Michelle,
Check to see if the felt has been left out of the metal plate at the end of the lift rod.
The plate captures a 1/8 inch bracket.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Michelle Smith 
  To: 'Pianotech List' 
  Sent: Tuesday, February 12, 2008 2:51 PM
  Subject: Young Chang crunchy damper sounds


  Hi all.  Customer has a Young Chang grand aprox. 10 years old.  When the damper pedal is pushed, a "crunchy" sound can be heard in the back action.  The damper levers sit on a rail that is covered with felt.  If I lift the damper levers with my hands and then push the pedal up and down, the sound goes away in that section.  

   

  Is the rail/tray felt making noise as it rubs on the bottom of the wooden damper levers or is the sound travelling from somewhere else?  I'm going back tomorrow and may try to rough up the felt but I wanted to ask y'all first.  

   

  Thanks in advance. 

   

  Michelle Smith

  Smith Piano Service

  Bastrop, Texas

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080212/d333168b/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC